Yamaha RX-V3200 Owner's Manual

Also see for RX-V3200: Owner's manual Service manual

Contents

39EnglishINTRODUCTION PREPARATIONBASICOPERATIONADVANCEDOPERATIONADDITIONALINFORMATION APPENDIXTUNINGPresetting Stations Automatically presetting stations(for FM stations)You can use the automatic preset tuning feature to storeFM stations. This function enables this unit toautomatically tune in to FM stations with strong signals,and to store up to 40 (8 stations x 5 groups) of thosestations in order. This feature enables you to easily tune into any preset station by selecting the preset stationnumber (see page 41).1 Press FM/AM to select the FM band.2 Press TUNING MODE (AUTO/MAN’L MONO)so that the “AUTO” indicator lights up on thefront panel display.3 Press and hold MEMORY (MAN’L/AUTO FM)for more than 3 seconds.The preset number, the “MEMORY” and “AUTO”indicators flash. Then, after about 5 seconds,automatic preset tuning begins from the frequencycurrently displayed toward the higher frequencies.When automatic preset tuning is completed, the frontpanel display shows the frequency of the last presetstation.TUNINGMODEAUTO/MAN'L MONOMEMORYMAN'L/AUTO FMAUTOL RVCR DVD TUNER CD PHONOCD RV AUX 1SPVCR2/DVR CBL/SAT MD / TAPETV / LDMEMORYMUTE VOLUMESLEEPAUTODA A 1 : F MBASSSPEAKERSABASSEXTENSIONPROCESSORDIRECTBVOLUMEINPUTINPUT MODEVIDEO AUXSILENTPRESET/TUNINGPHONESA/B/C/D/ES VIDEO VIDEO AUDIOL RMEMORYFM/AMEDITPRESET/TUNING6CHINPUTMAN'L/AUTO FM AUTO/MAN'L MONOOPTICALTUNINGMODESTANDBY/ ONNATURAL SOUND AV RECEIVERTREBLE REC OUT/ZONE 2– +D I G I T A LV-AUXVCR2/DVRVCR1PHONOEFFECTCDTUNERMD/TAPEDVDSOURCE/REMOTED-TV/LDCBL/SATCD-R– +PROGRAMSTEREO1 23Lights upNotes• Any stored station data existing under a preset number iscleared when you store a new station under that preset number.• When a station data is stored under a preset number, thefrequency and reception band are also stored.• You can manually replace a preset station with another FM orAM station by simply following the procedure in the section“Manually presetting stations” on page 40.• If the number of the received stations does not reach E8,automatic preset tuning has automatically stopped aftersearching all stations.• Only FM stations with sufficient signal strength are storedautomatically by automatic preset tuning. If the station youwant to store is weak in signal strength, tune in to it manuallyin the monaural mode, and store it by following the procedurein “Manually presetting stations” on page 40.Automatic preset tuning optionsYou can select the preset number from which this unitwill store FM stations and/or begin tuning toward lowerfrequencies. After pressing MEMORY in step 3:1. Press A/B/C/D/E and PRESET/TUNING l / h toselect the preset number under which the first stationwill be stored. Automatic preset tuning will stop whenstations have all been stored up to E8.2. Press PRESET/TUNING EDIT to turn off the colon (:)and then press PRESET/TUNING l to begin tuningtoward lower frequencies.Memory back-upThe memory back-up circuit prevents the stored datafrom being lost even if this unit is set in the standbymode, the power cord is disconnected from the ACoutlet, or the power supply is temporarily cut due topower failure. However, if the power is cut for morethan one week, the preset stations may be cleared. Ifso, store the stations again by using the presettingstation methods.FM/AM