Yamaha RX-V3200 Owner's Manual

Also see for RX-V3200: Owner's manual Service manual

Contents

49EnglishINTRODUCTION PREPARATIONBASIC OPERA-TIONADVANCEDOPERATIONADDITIONALINFORMATION APPENDIXREMOTE CONTROL FEATURES3 Press k / n to select the clear mode.The mode is shown in the display window in thefollowing order:4 Press and hold CLEAR again for about 3seconds.“C:OK” appears in the display window.Note• “C:NG” appears in the display window if the operation isunsuccessful. In this case, start over from step 2.5 Press CLEAR to exit from the clearing mode.Once you have cleared a learned function or macrofor a button, the button reverts to the factory setting.Note• “ERROR” appears in the display window under the followingcircumstances:– when pressing a button other than the cursor and ENTER;– when pressing more than one button at once; or– when MACRO ON/OFF, 10KEY/DSP or PARAMETER/SETMENU is switched to another position.CLEARCLEARClearing a Learned Function orMacroYou can clear the function learned in a certainprogrammable button in each area. To clear a learned function1 Press an input selector button, Å or ı toselect the source component you want toclear the function.The selected component name appears in the displaywindow.2 Press LEARN by using a ballpoint pen orsimilar object.“LEARN” and the selected component name appearalternately in the display window.Note• If you do not press any button within 30 seconds after step 2,the clearing process is canceled. If this happens, start over fromstep 2.3 Press the button that you want to clear for 3seconds as pressing CLEAR by using aballpoint pen or similar object.“C:OK” appears in the display window.4 Press LEARN again to exitfrom the learning mode. To clear the macro function1 Press an input selector button, Å or ı toselect the source component for which youwant to clear the function.The selected component name appears in the displaywindow.LEARNCLEARClears all programmed functionsincluding setup manufacturercodes. This returns to thefactory settings.(L: name of a component) Clearsall learned functions for thecomponent area. Press the inputselector button, Å or ı to selectthe component.Clears all learned functions forthis unit control area.Clears all learned functions.Clears all programmed macros.Clears all renamed sourcenames in the display window.LEARNPHONOA BCDDVDVCR2/DVRVCR 1D-TV/LD CBL/SATCD-RMD/TAPETUNERV-AUXPHONOA BCDDVDVCR2/DVRVCR 1D-TV/LD CBL/SATCD-RMD/TAPETUNERV-AUX