GENERAL SERVICE INFORMATION4-14 TNV DI Service ManualEngine OilAdding Engine Oil1. Make sure the engine is level.2. Remove the oil cap (Figure 4-5, (4)).3. Add the indicated amount of engine oil at thetop or the side engine oil filler port(Figure 4-5, (5)).4. Wait three minutes and check the oil level.5. Add more oil if necessary.6. Reinstall the oil cap (Figure 4-5, (4)) andhand-tighten. Over-tightening may damage thecap.Engine Oil Capacity (Typical)Note: These are the engine oil capacitiesassociated with a “deep standard” oilpan. The oil capacity will vary dependantupon which optional oil pan is used.Refer to the operation manual providedby the driven machine manufacturer forthe actual engine oil capacity of yourmachine.The following are the engine oil capacities forvarious Yanmar TNV engines.Engine Model Dipstick UpperLimit / Lower Limit3TNV82A 5.8 / 3.8 qt(5.5 / 3.6 L)3TNV84, 3TNV84T 7.1 / 4.1 qt(6.7 / 3.9 L)3TNV88 7.1 / 4.1 qt(6.7 / 3.9 L)4TNV84, 4TNV84T 7.8 / 4.2 qt(7.4 / 4.0 L)4TNV88 7.8 / 4.2 qt(7.4 / 4.0 L)4TNV94L 11.1 / 6.3 qt(10.5 / 6.0 L)4TNV98, 4TNV98T 11.1 / 6.3 qt(10.5 / 6.0 L)4TNV106(CL),4TNV106T(CL)14.8 / 5.3 qt(14.0 / 5.0 L)4TNV106(VM),4TNV106T(VM)14.8 / 6.9 qt(14.0 / 6.5 L)
