GENERAL SERVICE INFORMATIONTNV DI Service Manual 4-19SpecificationsEngine General SpecificationsNote: The information described in Principal Engine Specifications is for a “standard” engine. To obtain theinformation for the engine installed in your driven machine, please refer to the manual provided by thedriven machine manufacturer. Engine rating conditions are as follows (SAE J1349, ISO 3046/1):• Atmospheric Condition: Room temperature 77°F (25°C), Atmospheric pressure 29.53 in Hg (100 kPa, 750mm Hg), Relative humidity 30%• Fuel Temperature at Fuel Injector Pump Inlet: 104°F (40°C)• With Cooling Fan, Air Cleaner, Muffler: Yanmar Standard• After Engine Break-In Period; Output Allowable Deviation: ± 3%• 1 PS = 0.7355 kW• 1 hp SAE (Society of Automotive Engineers) = 0.7457 kWType Vertical In-line, Water Cooled, 4-Cycle Diesel EngineCombustion System Direct InjectionStarting System Electric StartingCooling System RadiatorLubricating System Forced Lubrication with Trochoid PumpPTO Position Flywheel EndDirection of Rotation Counterclockwise Viewed from the Flywheel End
