BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00©2018 BROADSOFT INC. PAGE 19 OF 117Step Command PurposeSystem Configuration Items y0000000000.cfgStep 4 Set Register Expire Timer.account.1.expires = 3600Set the registration period.Step 5 Enable reliable response.account.1.100rel_enable = 1Reliable provisional response(PRACK) should be enabled.Step 6 Enable Session Timer.account.1.session_timer.enable = 1account.1.session_timer.expires =300account.1.session_timer.refresher= 1Set the W60B IP DECT PHONE toenable Session Timer.Session Refresher:0 = uac1 = uasStep 7 Enable Call Waiting.call_waiting.enable = 1call_waiting.tone = 1Set the W60B IP DECT PHONEseries to enable Call Waiting and CallWaiting Tone.Step 8 Enable MWI.account.1.subscribe_mwi = 0account.1.subscribe_mwi_expires=3600MWI: Solicited when settingSubscribeMWI = 1.MWI: Not solicited when settingSubscribeMWI = 0.Step 9 Enable negotiated DTMF type.account.1.dtmf.type = 1Set the W60B IP DECT PHONE toenable inband or RFC 2833negotiated DTMF.Step 10 Select Transport Type.account.1.sip_server.1.transport_type = 0Set the SIP transport:Transport = 0 (UDP)Transport = 1 (TCP)Transport = 2 (TLS) (except T18P)Transport = 3 (DNS-SRV) (exceptT80P)4.3 Subscriber Level ConfigurationThis section identifies the device-specific parameters, including registration andauthentication. These settings must be unique across devices to be matched with thesettings for a BroadWorks subscriber.Provisioning a subscriber to register with BroadWorks allows calls to terminate to thesubscriber’s line. Registration requires that a unique address of record (AoR) isprovisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consistsof setting the line/port parameter to a unique value within the Application Server cluster.Step Command PurposeSubscriber parameters for the .cfgStep 1 Enable line 1 to be used.Example:account.1.enable = 1Enable a line of the W60B IPDECT PHONE to be used.Step 2 Configure display name for aline.Example:account.1.display_name = JoeFor the line, configure the name tobe displayed on the device.
