Yealink W60B Configuration Manual

Also see for Verizon One Talk W60B: Getting started Recovery guide Configuring guide User guide How to configure

Yealink W60B Configuration Manual Manual pdf 37 page image

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00©2018 BROADSOFT INC. PAGE 37 OF 1175.2.2 Configure BroadWorks Device Profile TypeThe device profile type is a system-level structure that defines how the device interfaceswith BroadWorks. It also identifies the default configuration files and other files, such asfirmware, which are required for the device to operate correctly. The device profile type iscreated by the system administrator. Group administrators use the device profile type tocreate a device profile. The device profile is an instance of the device profile type that isassociated with a physical device.There are two BroadWorks device profile configuration methods described: import andmanual. The import method takes a DTAF as input and builds the BroadWorks deviceprofile type(s) automatically. The manual method takes the administrator through thesteps to manually add and configure the device profile type(s).The import method should be used if all of the following prerequisites are met: The BroadWorks Release is 17.0 or later. The device profile type(s) being imported do not already exist on the system. (If eithera previous import or manual configuration was done, then the import fails.) There is a DTAF file available for import with a BroadWorks release level that is thesame as or prior to the release to which it is being imported. If the DTAF file is at arelease level later than the release being imported to, then the import can fail.Otherwise, use the manual method.For more detailed instructions, see the BroadWorks CPE Kit Usage Guide [8] and theBroadWorks Device Management Configuration Guide [2].5.2.2.1 Configuration Method 1: ImportThis section identifies the steps necessary to make use of the Device Management importfeature to configure BroadWorks to add the Yealink W60B IP DECT PHONE as a DeviceManagement-enabled device type. Also, see the BroadWorks CPE Kit Usage Guide [8].Download the Yealink W60B CPE kit from BroadSoft Xchange at xchange.broadsoft.com.Extract the DTAF file(s) from the CPE kit. These are the import files. Repeat the followingsteps for each model you wish to import.1) Log in to BroadWorks as an administrator.2) Browse to System → Resources → Identity/Device Profile Types and then clickImport.3) Select Browse to find the extracted DTAF file for the model and then click OK to startthe import.After the import finishes, complete the following post-import configuration steps:4) Browse to System → Resources → Identity/Device Profile Types.5) Perform a search to find the imported Yealink device profile type, Yealink W60B.6) Browse to the Profile page and change the Device Management Device AccessFQDN to your Xtended Services Platform (Xsp) or Xtended Services Platform clusteraddress.