|
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00©2018 BROADSOFT INC. PAGE 47 OF 117To assign the device profile to the user, browse to the BroadWorks → Addresses.5.2.5 Configure Edge DeviceIn many deployments, an edge device is deployed on the enterprise edge. Configure theedge device SIP server setting with the service provider’s Session Border Controller IPaddress or FQDN. If there is no edge device and the phones communicate directly withthe service provider’s SBC, skip this section.To integrate the edge device with Device Management, the SBC address tag(%SBC_ADDRESS%) defined in section 5.2.1.1 Create System Default Tags must beoverridden at the group level with the LAN address of the edge device. At the Group →Utilities → Device Configuration page, select the Yealink device profile (example: Yealink-W60B). Perform the following steps.1) Click on the Custom Tags tab.2) Click the Add button.3) Add the SBC tag.4) Enter “SBC_ADDRESS” as the tag.5) Enter the IP address as the value (edge device LAN IP address).6) Click OK to save the tag data.This Tag/Value will be applied to all Yealink W60B phones in the group using the modifiedDevice Profile Type.5.2.6 Configure Yealink W60B IP DECT PHONEThis section describes the steps necessary to configure the Yealink W60B to integratewith BroadWorks Device Management.The phone must be configured with the Device Management URL and authentication username and password. This configuration can be accomplished as described in thesections: 5.2.6.1 Manual Provisioning 5.2.6.2 No Touch Provisioning5.2.6.1 Manual ProvisioningLog in to the web user interface for the W60B IP DECT PHONE (https://address>). Go to the Settings → Auto Provision web page and set the following: Power On – On URL – Device Management server (Xtended Services Platform) device address URLExample: http(s)://xsp1.iop1.broadworks.net:80/dms/Yealink_W60B/ HTTP Authentication:User Name – BroadWorks Device Access (Example: yealink)Password – BroadWorks Device Access Password (Example: 123456)Restart the phone to force the phone to download the Device Management configurationfiles and firmware.
|
