Yealink W60B Configuration Manual

Also see for Verizon One Talk W60B: Getting started Recovery guide Configuring guide User guide How to configure

Yealink W60B Configuration Manual Manual pdf 27 page image

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00©2018 BROADSOFT INC. PAGE 27 OF 1174.5.1 BroadWorks User Service ConfigurationIntegration with the BroadWorks Xtended Services Interface for User ServiceConfiguration enables the phone to display and configure BroadWorks user services suchas Remote Office, BroadWorks Anywhere, Call Forwarding, and Simultaneous Ring. Toenable User Service Configuration, perform the following steps.Step Command PurposeStep 1 sip.authentication_for_xsi =Example:sip.authentication_for_xsi = 1Enable the XSP authenticationmode.0= BroadWorks User Logincredentials1= SIP AuthenticationcredentialsStep 2 account.1.xsi.user=account.1.xsi.password =Example:account.1.xsi.user= 2405551111account.1.xsi.password = 123456Set the Xsi login user nameand password for line 1.Step 3 account.1.xsi.host =Example:account.1.xsi.host=xsp1.iop1.broadworks.netSet the IP address or domainname of the Xsp server.Step 4 account.1.xsi.server_type =Example:xsi.server_type =httpSet the transport type for Xsi.Step 5 account.1.xsi.port =Example:account.1.xsi.port =80Set the transport port for Xsi.4.5.2 BroadWorks Directory ConfigurationIntegration with the BroadWorks Xtended Services Interface for directories enables thephone to download personal, group, and enterprise directories from BroadWorks andmakes them available to a user via the phone menus. To enable this feature, perform thefollowing steps.Step Command PurposeStep 1 Enable the group directory to bedisplayed on the IP phone.Example:bw_phonebook.group_enable = 1Enable the group directory tobe displayed on the IP phone.0 = Disabled1 = EnableStep 2 Configure the group directory namedisplayed on the IP phone.Example:bw_phonebook.group_displayname =GroupConfigure Group as the groupdirectory name displayed onthe IP phone.The default value is Group.Step 3 Configure the group common directoryto be displayed on the IP phone.Example:bw_phonebook.group_common_enable = 1Enable the group commondirectory to be displayed on theIP phone.0 = Disabled1 = Enable