|
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00©2018 BROADSOFT INC. PAGE 20 OF 117Step Command PurposeSubscriber parameters for the .cfgStep 3 S]=et Register User ID for aline.Example:account.1.user_name = 2405551111The register user ID mustcorrespond with the line/portsetting on BroadWorks.Step 4 Enable SIP Authentication for aline.Example:account.1.auth_name = 2405551111account.1.password = 123456If the Authentication service isconfigured on BroadWorks, theseparameters must be configured tomatch the BroadWorks settings.Step 5 Configure Network Phonebook.account.1.xsi.host =xsp1.iop1.broad works.netaccount.1.xsi.user =2413333601@as.iop1.broadworks.netaccount.1.xsi.password = yealinkThis configures the phone to usethe BroadWorks Xsi interface toretrieve the group phone directory.Host: This is the identity of theBroadWorks Xsp server/clusteraddress and relevant xsi-actionsparameters.User: This is the BroadWorksuser’s login name.Password: This is the BroadWorksuser’s login password.4.4 SIP Advanced Feature ConfigurationThis section provides configuration instructions for advanced SIP features supported bythe phone including but not limited to Shared Call Appearance, Busy Lamp Field, FeatureKey Synchronization, Call Center, and Emergency Call.4.4.1 Shared Call Appearance ConfigurationThe Shared Call Appearance (SCA) feature allows the administrator to add multiplelocations to a given line. Any of the locations can be used to originate or receive calls.When a call comes in to an idle line, all the provisioned locations for that line are alerted.The first location to answer the call is connected to the originator. If the line is alreadyactive in a call, only the active location is alerted.A subscriber can originate calls from any of the configured locations. All other locationsare unable to originate calls until all calls are released.It is recommended that the phone number plus an index (_) isused when provisioning the unique address of record (AoR) for each shared line. Forexample: 2405551111_2. If a phone number does not exist, the MAC address plus anindex could be used (_).
|
