ZIEHL-ABEGG FXDM25 Operating Instructions Manual

Contents

6 Controls and Menu6.1 Multipurpose LC display and keyboard22.05.2014v_display_2nd_explain.vsdMenu134ABCD2 S Display1 Display Menu group2 Display window3 Position of the menu in the menu group4 Current softkey function keys CS SymbolsModulation power section (control circuit 1)Modulation 0 - 10 V output (if control circuit 2 activated IOSetup)Key press feedbackKeys Keylock active. Press both softkeys C simultaneously for 5 sto lock and then again for 5 s to unlock.AON / OFFBy this key the modulation for the motor can beswitched on and off.The key affects the motor ON/OFF functionMenu group start!Display |STOP| for switch OFF.For a operation with a second control circuit themodulation via 0 - 10 V output is switched off too.Attention, only electronic disconnection!No disconnection (isolation) when switched off, inaccordance with VBG4 §6)!STOP No controller enable Start / Motor = OFF, key A = OFF,IO Setup function |1D|Moon symbol for active Setpoint 2 IO SetupFreeze function active (modulation value is retained) IOSetupFire symbol (heating operation) operation / mode 2.03B Help texts (no function yet) Timer function active (only with add-on module) TimerCThe function of these keys are variable and depend-ent on the menu where you located (Softkey). Thecurrent function is explained in the display abovethe key.Activation of the keylock Symbol for lock.Brakes active Motor SetupBoosting active (automatic voltage increase) Motor SetupMenu To display Main menu + Log entry which still was not seenInfo To menu group Info Direction of rotation reversal Motor Setup, IO SetupEdit Open adjustable menu item Motorheating active Motor Setup, IO SetupEnter Open menu groupAccept settings (store)Alarm symbol (fault message alternating with actual valuedisplay) Messages & TroubleshootingCancel Cancel setting and exit menu item Connection/communication error Messages & Trouble-shootingBack One step back in the menu OL Overload, current limiting active Messages & Trouble-shootingDetails Display of details for fault messages inmenu group ProtocolIGBT cool-down phase = wait Messages & Troubleshoot-ingD ▲ Menu selection, increase value Automatic power management active (derating) Mes-sages & Troubleshooting▼ Menu selection, reduce valueOperating Instructions Fcontrol – model series FXDM25/32AM Controls and MenuL-BAL-E212-GB 1451 Index 003 Part.-No.21/123