3Com 2426-PWR Installation And User Manual

Also see for 2226-SFP Plus: User guide

Contents

32 C HAPTER 3: C ONNECTING TO THE WEB I NTERFACERunning the 3Com Switch Detect ApplicationThe 3Com Baseline Switch CD-ROM contains, in addi-tion to the documentation, the 3Com Switch DetectApplication.To use 3Com Switch Detect to connect to the Webinterface of your Switch, do the following:1 On the computer that is connected to your Switch(either directly or on a network that is on the same sub-net), insert the CD-ROM into its CD drive.If you have autorun enabled, you will be presented witha menu showing the contents of the CD-ROM. Selectthe 3Com Detect Application link to install the utility.Follow the onscreen instructions.If the auto-run program does not start, you shouldbrowse to your CD-ROM drive, go to the /switch detectdirectory and double click on setup.exe. Follow theprompts that will take you through the installation pro-cess.Once installed, the 3Com Switch Detect Application canbe accessed from the Windows Start/Programs list.When the 3Com Detect application starts, you will besee the Welcome Screen (Figure 12).Figure 12 The 3Com Switch Detect Welcome Screen2 If the computer has multiple network adapters, selectthe adapter that connects the computer to the networkor Switch, click "Next."3 You will then be offered the choice of searching thesame subnet that your PC is on for a connected switch(default), or specifying an IP range. Note that specifyinga large range may take some time for the search tocomplete.