3Com 2426-PWR Installation And User Manual

Also see for 2226-SFP Plus: User guide

Contents

96 A PPENDIX D: 3COM CLI R EFERENCE G UIDEUpgradeThe Upgrade command starts a system download andthereby allowing a system upgrade.SyntaxupgradeDefault ConfigurationThis command has no default configuration.User GuidelinesThe Upgrade command prompts the user for requiredinformation. The TFTP server IP address and the softwareimage file name on the server must be specified.During the upgrade process, a series of dots appearrepresenting the upgrade process in the CLI interface.When the upgrade process is completed, the commandprompt reappears.The Dual Software Image feature is supported, thereforethe next boot after the Upgrade command will alwaysuse the newly downloaded image.ExampleThe following example upgrades the system software onthe Switch using a TFTP server:Select menu option: upgradeTFTP Server Address [192.168.1.254]: 192.168.1.9File Name [runtime2.bix]: bfs00_00_00_11.binSoftware Upgrade hasbegun......................................................................................................................................................................................................................................................................................................................................................................................................................................................................Upgrade Successful.Select menu option: