ATM E3/T3 Interface Configuration Commands 205[3com-T3 1/0/0]using t3display controller t3 Syntaxdisplay controller t3 interface-numberViewAny viewParameterinterface-number: CT3 interface number.DescriptionUsing the display controller t3 command, you can view the state information of aCT3 interface.In addition to the state information of the CT3 interface, the command can displaythe information of each T1 line on the CT3 interface if the interface is working inCT3 mode.ExampleDisplay the information related to the interface T3 1/0/0.[3com]display controller t3 1/0/0T3 1/0/0 is downDescription : 3Com Routers, T3 1/0 InterfaceFrame-format C-BIT Parity, line code B3ZS, cable 49 feet, clockslave, loopback not setAlarm: noneERROR: 0 BiPolarViolation, 0 EXcessiveZero, 1 FrameError0 ParityBitError, 0 C-BitParityBitError, 0 FarEndBlockErrorATM E3/T3 InterfaceConfigurationCommandscable Syntaxcable { long | short }undo cableViewATM T3 Interface viewParameterlong: Long distance mode. Cable length ranges from 151 to 500 meters.short: Short distance mode. Cable length ranges from 0 to 150 meters.
