LDP Configuration Commands 769[3Com-mpls] static-lsp transit bj-sh incoming-interface serial3/0/0in-label 123 nexthop 202.34.114.7 out-label 253statistic interval Syntaxstatistics interval interval-timeundo statistics intervalViewMPLS viewParameterinterval-time: Time interval in seconds. It ranges from 30 to 65535.DescriptionUsing the statistic interval command, you can configure the time interval forreporting statistics. Using the undo statistic interval command, you can restore thedefault value.By default, the interval is 0 seconds, that is, not to report statistics.ExampleConfigure the time interval as 30 seconds, that is, to report statistics every 30seconds.[3Com-mpls] statistics interval 30LDP ConfigurationCommandsdebugging mpls ldp Syntaxdebugging mpls ldp { all | main | advertisement | session | pdu | notification |remote } [ interface interface-type interface-num ]undo debugging mpls ldp { all | main | advertisement | session | pdu | notification |remote } [ interface interface-type interface-num ]ViewUser viewParameterall: displays all debugging information related to LDP.main: displays the debugging information of main LDP task.advertisement: Displays the debugging information during processing LDPadvertisement.session: Displays debugging information during processing LDP session.pdu: Displays the debugging information during processing PDU data packets.
