Frame Relay Configuration Commands 291Frame RelayConfigurationCommandsdebugging fr Syntaxdebugging fr { all | inarp | compress | congestion | de | event | fragment | lmi | mfrcontrol | packet | transmit-rate } [ interface interface-type interface-number [ dlcidlci-number ] ]undo debugging fr { all | inarp | compress | congestion | de | event | fragment | ipc |lmi | mfr control | packet | transmit-rate } [ interface interface-typeinterface-number [ dlci dlci-number ] ]ViewUser viewParameterall: All frame relay information debugging.arp: Information debugging of frame relay address resolution protocol. When thisparameter is in use, DLCI can be specified.compress: Information debugging of frame relay compression.congestion: Information debugging of frame relay traffic congestionmanagement.de: DE information debugging of FRTS.event: Information debugging of frame relay event. When this parameter is used,no interface can be specified.fragment: Information debugging of frame relay fragment. When this parameteris in use, DLCI must be specified.lmi: Information debugging of frame relay LMI (Local Management Interface)protocol.mfr control: Information debugging of multilink frame relay bundle and bundlelink.packet: Information debugging of frame relay packet. When this parameter is inuse, DLCI can be specified.transmit-rate: Information debugging of FRTS transmit rate.interface-type: Interface type.interface-number: Interface number, in 3-dimension form (slot number/cardnumber/interface number).
