Kompella MPLS L2VPN Configuration Commands 809undo mpls l2vcViewInterface viewParameterip-address: lsr-id address of peer PE.vc-id: Connected VC ID.DescriptionUsing the mpls l2vc command, you can create an LDP connection. Using the undompls l2vc command, you can delete the connection.Supporting interface types: Serial, Asy Serial, POS, ATM, ATM subinterface,Ethernet, Ethernet subinterface, VE, GE, GE subinterface.Enable MPLS L2VPN and encapsulate CCC on the interface before using thiscommand.For the related command, see mpls l2vpn and ccc.ExampleCreate LDP connection.[3Com-Ethernet3/0/0] mpls l2vc 10.0.0.11Kompella MPLS L2VPNConfigurationCommandsce Syntaxce name [ id id range range ] [ default-offset offset ] ]undo ce nameViewMPLS L2VPN viewParametername: CE name, unique in the current PE VPN.id: CE ID, unique in VPN, represents a CE, ranging from 1 to 65535.offset:Specifies default offset value of the original CE.range: CE range, in other words, the maximum CE number local CE can connectwith, ranging from 1 to 100. Default value is 10.
