4 LINK LAYER P ROTOCOLPPP and MPConfigurationCommandsdisplay ppp mp Syntaxdisplay ppp mp [ interface interface-type interface-num ]ViewAny viewParameterinterface-type interface-num: Used to specify the interface to be viewed.DescriptionUsing the display ppp mp command, you can view all the interface informationand statistics of MP.For the related commands, see link-protocol ppp and ppp mp.ExampleDisplay the MP interface information.<3Com> display ppp mpTemplate is Virtual-Template1Bundle, quid0, 1 member, slot 3, Master link is Virtual-Template1:00 lost fragments, 0 reordered, 0 unassigned, sequence 0/0 rcvd/sentThe bundled son channels are: Serial3/0/0Table 1 3ComMP display information descriptionField DescriptionTemplate is Virtual-Template1 Virtual-template interfaceBundle quid0 Bundle name1 member The number of bound channelsslot 3 Bundled in slot 3Master link is Virtual-Template1:0 Master link0 lost fragments Lost fragments0 reordered Reordered packet number0 unassigned Unassigned fragmentssequence 0/0 rcvd/sent Received sequence number/sent sequencenumberThe bundled son channels are: The following displays all the bundled sonchannels at this logical channel
