Multicast Static Route Configuration Commands 753peer route-policy Syntaxpeer { group-name | peer-address } route-policy policy-name { import | export }undo peer { group-name | peer-address } route-policy policy-name { import | export}ViewIPv4 multicast sub-address family viewParametergroup-name: Name of the peer group.peer-address: IP address of the peer.route-policy policy-name: Route policy specified.import: Applies route policy to the routes received from the peer (group).export: Applies route policy to the routes advertised to the peer (group).DescriptionUsing the peer route-policy command, you can configure route policy for thespecified peer (group). Using the undo peer route-policy command, you canremove the route policy of the peer (group).By default, no route policy is specified for the peer (group).ExampleApply route policy policy 1 to the routes received from the peer group named test.<3Com-bgp-af-mul] peer test route-policy policy1 importMulticast Static RouteConfigurationCommandsdelete rpf-route-static all Syntaxdelete rpf-route-static allViewSystem viewParameterNoneDescriptionUsing the delete rpf-route-static all command, you can delete all the staticmulticast routes.
