16 CHAPTER 1: GETTING STARTEDStarting the NBXNetSet UtilityTo use the NBX NetSet utility, you need a computer that is connected toyour local area network (LAN) and that has a web browser. (You do notneed Internet access.) To start the NBX NetSet utility:1 Ask your administrator for the IP address (or DNS host name) for yourNBX system. In the web browser on your computer (Microsoft InternetExplorer version 5.5 or later is optimal), enter the IP address (or DNS hostname) in the Address field, and then press Enter. The NBX NetSet utilitylogin screen appears.You cannot log in to the NBX NetSet utility until you establish yourpassword through your telephone using NBX voice prompts or theFeature Code sequence. See Table 4 earlier in this chapter.2 Click User to log in as a user. The password dialog box appears.3 Type your NBX NetSet utility user identification (always your 3-digit or4-digit telephone extension) and your NBX NetSet utility password, andthen click OK.Navigation andShortcut Iconsin the NBX NetSetUtilityThe icons at the lower right of any Personal Settings window allow youor your administrator to navigate to the following features:Table 5 Navigation IconsIcon Action Where You GoBack ■ For the User goes to the main NBX NetSet utility logindialog box■ For the Administrator goes to the NBX NetSet utility mainmenu windowHelp Help for the fields and procedures related to the screen
