Establishing a Conference Call Using Feature Codes 61Blind Transfer In a blind transfer, you transfer the call without notifying the recipient:1 While on a call, press the Xfer button. The system places the call on holdand selects a new line.2 Dial the number to which you want to transfer the call.3 As soon as you hear a full ring, press the Xfer button and hang up.If you press the Xfer button too soon after you dial the number, thetransfer might not occur.)Direct Mail Transfer You can transfer a call directly into another user’s voice mailbox. The calldoes not ring on that user’s telephone.Calls transferred to a user’s mailbox by means of Direct Mail Transfer arealways directed into that user’s voice mailbox, even if the recipient hasspecified a different call coverage point.On a 3Com Cordless Telephone:1 While you are on a call, press Feature + 441.2 Dial the voice mail extension to which you want to transfer the call.3 Hang up the handset.Establishing aConference CallUsing FeatureCodesYou can establish a Conference Call with up to four parties, includingyourself. You must be using a telephone on the NBX system to establishthe call. The other three parties can be any combination of internal andexternal parties.From a 3Com Cordless Telephone, follow these steps:1 Dial a call, or receive a call from someone else. Two parties are now onthe call.2 While on the call, press Feature + 430. The system selects a new line andplaces the first party on hold.
