374 CHAPTER 19: ACL C ONFIGURATION■ Port-based mode: The Switch delivers the traffic actions in the QoS profile directlyto the user port.Perform the following configuration in Ethernet Port View.Table 395 Configuring Profile Application ModeBy default, port-based mode is enabled on the port.Applying QoS Profile tothe PortWith this configuration, you can apply all traffic actions in the QoS profile to thecurrent port.In System ViewIn System View, you can apply the QoS profile to one or more consecutive ports.Table 396 Applying QoS Profile to the Port in System ViewIn Ethernet Port ViewIn Ethernet Port View, you can only apply the QoS profile to the current port.Table 397 Applying QoS Profile to the Port in Ethernet Port ViewYou cannot delete the specific QoS profile once you apply it to the port.Displaying and Debugging QoS Profile ConfigurationUse the display command in any view to check the configuration result of the QoSprofile.Table 398 Displaying QoS Profile ConfigurationQoS ProfileConfiguration ExampleNetworking RequirementThe Switch implements the QoS profile function for the accessed user.Operation CommandConfigure the user-based mode on the port qos-profile user-basedRestore the default (port-based) mode onthe portundo qos-profile profile_nameOperation CommandApply the QoS profileto the portapply qos-profile profile_name interface {interface_name | interface_type interface_num } [ tointerface { interface_name | interface_typeinterface_num } ]Remove theconfigurationundo apply qos-profile profile_name interface {interface_name | interface_type interface_num } [ tointerface { interface_name | interface_typeinterface_num } ]Operation CommandApply the QoS profile to the port apply qos-profile profile_nameRemove the configuration undo apply qos-profile profile_nameOperation CommandDisplay QoS profileconfigurationdisplay qos-profile { all | name profile_name |interface { interface_name | interface_typeinterface_num } | user user_name }
