Displaying Information of the display acl command 387■ A fixed weighting value is deducted from the weighting value of each element ofthe rule. The rule with the smallest weighting value left has the highest priority.■ If the number and type of elements are the same for all rules, then the rule withthe smallest sum value of all its elements has the highest priority.For more ACL configuration, refer to the QoS/ACL part of the Switch 5500 SeriesEthernet Operation Manual.DisplayingInformation of thedisplay acl commandThe display acl command has included the total number of ACLs as newly addeddisplaying information:For example: display acl allTotal ACL Number: 1Advanced ACL 3000, 1 ruleAcl's step is 1rule 0 permit ipFor more information on the display acl command, refer to the QoS/ACL part of theSwitch 5500 Series Ethernet Command Manual.Subdividing DSCPwhile Defining ACLRulesThe new version has subdivided the value range of DSCP while defining the ACLrules, as illustrated in Table 407.When updating the software, the device automatically converts the fields af1, af2,af3, af4 in the old DSCP configuration into af11, af21, af31, af41 respectively.For more information on the ACL commands, refer to the QoS/ACL part of the Switch5500 Series Ethernet Command Manual.Table 407 Detailed information on subdivision of DSCP PriorityBeforesubdivision After subdivisionDSCP value(in binaryformat)DSCP value(in decimalformat)af1 af11 001010 10af12 001100 12af13 001110 14af2 af21 010010 18af22 010100 20af23 010110 22af3 af31 011010 26af32 011100 28af33 011110 30af4 af41 100010 32af42 100100 34af43 100110 36
