Installation ManualH3C S7500 Series Ethernet Switches Chapter 7 Software Maintenance7-13User(none):lyt331 Give me your password, pleasePassword:230 Logged in successfully[ftp] get SWITCH002.app SWITCH002.app[ftp] get Switchbtm.app Switchbtm.btm[ftp] byeNote:You can download two versions of host software and specify one as the primary andthe other as the backup.2) Load the Boot ROM. boot bootrom Switchbtm.btm slot 0Board 0 upgrading BOOTROM, please wait...Upgrade board 0 BOOTROM succeeded!3) Load the host software.z Load the primary file. boot boot-loader primary SWITCH002.appz Load the backup file. boot boot-loader backup SWITCH001.app display boot-loaderThe primary app to boot of board 0 at the next time is: flash:/SWITCH002.appThe backup app to boot of board 0 is: flash:/SWITCH001.appThe app to boot of board 0 at this time is: flash:/SWITCH001.app reboot //Check whether other configuration is saved before rebooting thesystem, in case the configuration is lost after the reboot.Now you have completed the downloading of Boot ROM and host software.Note that you must reboot the switch to validate host software downloading. If the Flashmemory is not large enough, you can delete some program files (for example, the hostprogram that is no longer in use) from the Flash memory after loading the Boot ROM.Then you can upload the host program to the switch through FTP. Do not power off theswitch during the loading process.7.3.2 Loading using TFTPLoading using TFTP is similar with loading using FTP, except that the protocol used fordownloading is TFTP. In this case, the switch can only be used as a TFTP client todownload the software to its Flash memory from the TFTP server. After the
