110 CHAPTER 4: CONFIGURING PATH BUILDER S330/S310 MODULES , PORTS , AND APPLICATIONSConfiguring the SerialCardThe only type of configuration you can perform on the serial card is to put it inservice or out of service. To set the administrative status of the serial card, followthese steps:1 From the Configuration Management menu, shown earlier in Figure 50, select[1] Manage Card to display the List Card menu, shown in Figure 51.2 From the List Card menu, select [5] SIM to display the SIM Configuration Port/CardSelection menu, shown in Figure 76.3 Select [2] Card Configuration to display the SIM Card Configuration menu, shownin Figure 80.Figure 80 Configuring the Serial Card4 Select [1] Set Admin. Status to put the Ethernet card in service or out of service.The maximum frame size is fixed at 8KB.Configuring theEthernet InterfaceConfiguring the Ethernet interface involves the following tasks:n Configuring the Ethernet portn Configuring the Ethernet cardn Configuring the bridgeConfiguring theEthernet PortThe only type of configuration you can perform on the Ethernet port is to put it inservice or out of service. To set the administrative status of the Ethernet port,follow these steps:1 From the Configuration Management menu, select [1] Manage Card to display theList Card menu, shown earlier in Figure 51.2 From the List Card menu, select [6] ETHERNET to display the EthernetConfiguration Port/Card Selection menu, shown in Figure 81.
