83 BASIC CONFIGURATIONSWhile performing basic configurations of the system, go to these sections forinformation you are interested in:■ “Basic Configurations” on page 1021■ “CLI Features” on page 1027Basic Configurations This section covers the following topics:■ “Entering/Exiting System View” on page 1021■ “Configuring the Device Name” on page 1021■ “Configuring the System Clock” on page 1021■ “Configuring a Banner” on page 1023■ “Configuring CLI Hotkeys” on page 1025■ “Configuring User Levels and Command Levels” on page 1026■ “Displaying and Maintaining Basic Configurations” on page 1027Entering/Exiting SystemViewFollow these steps to enter/exit system view:n With the quit command, you can return to the previous view. You can execute thereturn command or press the hot key to return to user view.Configuring the DeviceNameConfiguring the SystemClockConfiguring the system clockFollow these steps to configure the system clock:To do… Use the command… RemarksEnter system view from user view system-view -Return to user view from system view quit -To do… Use the command… RemarksEnter system view system-view -Configure the devicenamesysname sysname OptionalThe device name is 3Com by default.
