Displaying and Maintaining PoE 1199Displaying andMaintaining PoEPoE ConfigurationExampleNetwork requirementsThe device provides power supply for PDs through PoE interfaces.■ GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IPtelephones.■ GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are connected to accesspoint (AP) devices.■ The power priority of GigabitEthernet 1/0/2 is critical.■ The power of the AP device connected to GigabitEthernet 1/0/11 does notexceed 9,000 milliwatts.Network diagramFigure 355 Network diagram for PoEConfiguration procedure# Enable PoE on GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, GigabitEthernet1/0/11, and GigabitEthernet 1/0/12. system-view[Sysname] interface GigabitEthernet 1/0/1To do… Use the command… RemarksDisplay the mapping between ID,module, and slot of all PSEs.display poe device Available in anyviewDisplay the power state andinformation of the specified PoEinterfacedisplay poe interface[ interface-type interface-number ]Display the power information of a PoEinterface(s)display poe interface power[ interface-type interface-number ]Display the information of PSE display poe pseDisplay all information of theconfigurations and applications of thePoE configuration filedisplay poe-profile [ index index| name profile-name ]Display all information of theconfigurations and applications of thePoE configuration file applied to thespecified PoE interfacedisplay poe-profile interfaceinterface-type interface-numberGE 1/0 /1GE 1/0 /2GE 1/0 /11GE1 /0/12
