SNMP Configuration 933string of numbers {1.2.1.1}. This string of numbers is the OID of the managedobject B.Figure 273 MIB treeSNMP Configuration As configurations for SNMPv3 differ substantially from those of SNMPv1 andSNMPv2c, their SNMP functionalities will be introduced separately below.Follow these steps to configure SNMPv3:A261521121BTo do… Use the command… RemarksEnter system view system-view -Enable SNMP Agent snmp-agent OptionalDisabled by defaultYou can enable SNMP Agentthrough this command or anycommands that begin withsnmp-agent.Configure SNMP Agentsystem informationsnmp-agent sys-info{ contact sys-contact |location sys-location |version { all | { v1 | v2c |v3 }* } }OptionalThe defaults are as follows:3Com Corporation forcontact,Marlborough, MA forlocation, and SNMP v3 for theversion.Configure an SNMP agentgroupsnmp-agent group v3group-name[ authentication | privacy ][ read-view read-view ][ write-view write-view ][ notify-view notify-view ][ acl acl-number ]RequiredConvert the user-definedplain text password to acipher text passwordsnmp-agentcalculate-passwordplain-password mode { md5 |sha } { local-switch fabricid |specified-switch fabricidstring }Optional
