Scheduling an NQA Test Group 1063Scheduling an NQATest GroupWith this configuration, you can set the start time and time period for a test groupto perform the test and start the test.Configuration prerequisitesBefore scheduling an NQA test group, make sure:■ Required test parameters corresponding to a test type have been configured;■ For the test which needs the cooperation with the NQA server, configurationon the NQA server has been completed.Scheduling an NQA test groupFollow these steps to schedule an NQA test group:c CAUTION: After an NQA test group is scheduled, you cannot enter the test groupview or test type view.Configure the NQA probetimeout timeprobe timeout timeout OptionalBy default, the timeout time is 3000milliseconds.This parameter is not available for aUDP-jitter test.Configure the maximumnumber of history recordsthat can be saved in a testgrouphistory-records number Optional50 by default.Configure the maximumnumber of hops a probepacket traverses in thenetworkttl value Optional20 by default.This parameter is not available for aDHCP test.Configure the ToS field inan IP packet header in anNQA probe packettos value Optional0 by default.This parameter is not available for aDHCP test.Enable the routing tablebypass functionroute-optionbypass-routeOptionalDisabled by default.This parameter is not available for aDHCP test.To do… Use the command… RemarksTo do… Use the command… RemarksEnter system view system-view -Schedule an NQA test group nqa schedule admin-nameoperation-tag start-timenow lifetime foreverRequiredConfigure the maximumnumber of the tests that theNQA client can simultaneouslyperformnqa agent max-concurrentnumberOptionalThe default number is 2
