3Com VCX V7122 SIP VoIP Gateway User Manual 1952 Set the BootP and TFTP preferences (see Setting the Preferences on page 197).3 Add client configuration for the VoIP gateway that you want to initialize by the BootP,seeConfiguring the BootP Clients on page 199.4 Reset the VoIP gateway, either physically or remotely, causing the device to use BootPto access the network and configuration information.BootP/TFTP Application User InterfaceFigure 65 shows the main application screen for the BootP/TFTP utility.Figure 65 Main ScreenFunction Buttons on the Main Screen• Pause: Click this button to pause the BootP Tool so that no replies are sent toBootP requests. Click the button again to restart the BootP Tool so that itresponds to all BootP requests. The Pause button provides a depressed graphicwhen the feature is active.• Edit Clients: Click this button to open a new window that enables you to enterconfiguration information for each supported VoIP gateway. Details on the Clientswindow are provided in Configuring the BootP Clients on page 199.• Edit Templates: Click this button to open a new window that enables you tocreate or edit standard templates. These templates can be used whenconfiguring new clients that share most of the same settings. Details on theTemplates window are provided in Managing Client Templates on page 203.• Clear Log: Click this button to clear all entries from the Log Window portion ofthe main application screen. Details on the log window are provided inLog Window on page 196.
