3Com VCX V7122 SIP VoIP Gateway User Manual214Replacing the Main Corporate Logo with an Image FileTo replace the default logo with your own corporate image via the Web Interface, followthese steps:1 Access the VCX V7122 Embedded Web Server (see Accessing the Embedded WebServer on page 42).2 In the URL field, append the suffix ‘AdminPage’ (note that it’s case-sensitive) to the IPaddress, e.g., http://10.1.229.17/AdminPage.3 Click Image Load to Device; the Image Download screen is displayed (see Figure 72).Figure 72 Image Download Screen4 Click the Browse button in the Send Logo Image File from your computer to theDevice box. Navigate to the folder that contains the logo image file you want to load.5 Click the Send File button; the file is sent to the device. When loading is complete, thescreen is automatically refreshed and the new logo image is displayed.6 Note the appearance of the logo. If you want to modify the width of the logo (the defaultwidth is 339 pixels), in the Logo Width field, enter the new width (in pixels) and pressthe Set Logo Width button.7 To save the image to flash memory so it is available after a power fail see SaveConfiguration on page 88.The new logo appears on all Web Interface screens.Use a gif, jpg or jpeg file for the logo image. It is important that the image file has afixed height of 59 pixels (the width can be configured). The combined size of theimage files (logo and background) is limited to 64 kbytes.If you encounter any problem during the loading of the files, or you want to restorethe default images, click the Restore Default Images button.
