3Com VCX V7122 SIP VoIP Gateway User Manual 41C HAPTER 5: W EB MANAGEMENTConfiguration ConceptsCustomers can use the VCX V7122 in a wide variety of applications, enabled by itsparameters and configuration files (e.g., Call Progress Tones (CPT), etc.). The parameterscan be configured and configuration files can be loaded using: A standard Web Browser (described and explained in this section). A configuration file referred to as the ini file. For information on how to use the ini file seeChapter 6: ini File Configuration of the VCX V7122 on page 91. An SNMP browser software (see Chapter 11: SNMP-Based Management on page 173). 3Com’s Element Management System (EMS) (see Element Management System onpage 185).To upgrade the VCX V7122 (load new software or configuration files onto the gateway) usethe Software Upgrade wizard, available through the Web Interface (see Software UpgradeWizard on page 81), or alternatively use the BootP/TFTP configuration utility (see Upgradingthe VCX V7122 on page 169).For information on the configuration files see Chapter 7: Configuration Files on page 139.Overview of the Embedded Web ServerThe Embedded Web Server is used both for gateway configuration, including loading ofconfiguration files, and for run-time monitoring. The Embedded Web Server can be accessedfrom a standard Web browser, such as Microsoft™ Internet Explorer, Netscape™ Navigator,etc. Specifically, Users can employ this facility to set up the gateway configurationparameters. Users also have the option to remotely reset the gateway and to permanentlyapply the new set of parameters.Computer RequirementsTo use the Web Interface, the following is needed: A computer capable of running your Web browser. A network connection to the VoIP gateway. One of the following compatible Web browsers: Microsoft Internet Explorer (version 6.0 and higher). Netscape Navigator (version 7.0 and higher).Some Java-script applications are not supported in Netscape.
