3Com VCX V7122 SIP VoIP Gateway User Manual 221Figure 75 Call Progress Tones Conversion Screen3 Click the Select File… button that is in the ‘Call Progress Tone File’ box.4 Navigate to the folder that contains the CPT ini file you want to convert.5 Click the ini file and click the Open button; the name and path of both the ini file and the(output) dat file appears in the fields below the Select File button.6 Enter the Vendor Name, Version Number and Version Description in the correspondingrequired fields under the ‘User Data’ section.7 Set ‘CPT Version’ to ‘Version 1’ only if you use this utility with a version released beforeversion 4.4 of the device software (this field is used to maintain backward compatibility).8 Check the ‘Use dBm units for Tone Levels’ check box. Note that the levels of the CallProgress Tones (in the CPT file) must be in -dBm units.9 Click the Make File button; you’re prompted that the operation (conversion) wassuccessful.10 Close the application.Creating a Loadable Voice Prompts FileFor detailed information on the Voice Prompts file see Prerecorded Tones (PRT) File onpage 141.To create a loadable Voice Prompts dat file from your voice recording files, follow thesesteps:1 Execute the TrunkPack Downloadable Conversion Utility, DConvert240.exe (suppliedwith the software package); the utility’s main screen opens (see Figure 74 on page 220).2 Click the Process Voice Prompts File(s) button; the Voice Prompts screen, shown inFigure 76, opens.
