3Com VCX V7122 SIP VoIP Gateway User Manual200To add a client to the list without using a template, follow these steps:1 Click on the Add New Client Icon;a client with blank parameters is displayed.2 Enter values in the fields on the right side of the window, using the guidelines for thefields in Setting Client Parameters on page 201.3 Click Apply to save this entry to the list of clients, or click Apply & Reset to save thisentry to the list of clients and send a reset message to that gateway to immediatelyimplement the settings.Note: To use Apply & Reset you must enable ARP Manipulation in the Preferenceswindow. Also, you must have administrator privileges for the computer you are using.An easy way to create several clients that use similar settings is to create a template. Forinformation on how to create a template see Managing Client Templates on page 203.To add a client to the list using a template, follow these steps:1 Click on the Add New Client Icon;a client with blank parameters is displayed.2 In the field Template, located on the right side of the Client Configuration Window,click on the down arrow to the right of the entry field and select the template that youwant to use.3 The values provided by the template are automatically entered into the parameter fieldson the right side of the Client Configuration Window. To use the template parameters,leave the check box next to that parameter selected. The parameter values appear ingray text.4 To change a parameter to a different value, unselect the check box to the right of thatparameter. This clears the parameter provided by the template and enables you to editthe entry. Clicking the check box again restores the template settings.5 Click Apply to save this entry to the list of clients or click Apply & Reset to save thisentry to the list of clients and send a reset message to that gateway to immediatelyimplement the settings.Note: To use Apply & Reset you must enable ARP Manipulation in the Preferenceswindow. Also, you must have administrator privileges for the computer you are using.Deleting ClientsTo delete a client from the BootP Tool, follow these steps:1 Select the client that you wish to delete by clicking on the line in the window for thatclient.2 Click the Delete Current Client button3 A warning pops up. To delete the client, click Yes.Editing Client ParametersTo edit the parameters for an existing client, follow these steps:1 Select the client that you wish to edit by clicking on the line in the window for that client.2 Parameters for that client display in the parameter fields on the right side of the window.3 Make the changes required for each parameter.
