3Com Wireless LAN Switch WX1200 Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Configuration guide Installation and Basic Configuration Guide Command reference

Contents

436 CHAPTER 13: IGMP S NOOPING COMMANDSset igmp mrsol Enables or disables multicast router solicitation by a WX.Syntax — set igmp mrsol {enable | disable} [vlan vlan-id] enable — Enables multicast router solicitation. disable — Disables multicast router solicitation. vlan vlan-id — VLAN name or number. If you do not specify aVLAN, multicast router solicitation is disabled or enabled on all VLANs.Defaults — Multicast router solicitation is disabled on all VLANs bydefault.Access — Enabled.History — Introduced in MSS Version 3.0.Examples — The following command enables multicast routersolicitation on VLAN orange:WX1200# set igmp mrsol enable vlan orangesuccess: change acceptedSee Also set igmp mrsol mrsi on page 436set igmp mrsol mrsi Changes the interval between multicast router solicitations by a WX onone VLAN or all VLANs.Syntax — set igmp mrsol mrsi seconds [vlan vlan-id] seconds — Number of seconds between multicast router solicitations.You can specify a value from 1 through 65,535. vlan vlan-id — VLAN name or number. If you do not specify aVLAN, MSS changes the multicast router solicitation interval for allVLANs.Defaults — The interval between multicast router solicitations is 30seconds by default.Access — Enabled.History — Introduced in MSS Version 3.0.