530 CHAPTER 18: S ESSION MANAGEMENT COMMANDSTable 93 display sessions network session-id OutputField DescriptionGlobal Id A unique session identifier within the Mobility Domain.State Status of the session: AUTH, ASSOC REQ — Client is being associated by the 802.1Xprotocol. AUTH AND ASSOC — Client is being associated by the 802.1Xprotocol, and the user is being authenticated. AUTHORIZING — User has been authenticated (for example,by the 802.1X protocol and an AAA method), and is enteringAAA authorization. AUTHORIZED — User has been authorized by an AAA method. ACTIVE — User’s AAA attributes have been applied, and theuser is active on the network. DEASSOCIATED — One of the following:Wireless client has sent the WX switch a disassociate message.User associated with one of the current WX switch’s MAPaccess points has appeared at another WX switch in theMobility Domain. ROAMING AWAY — The WX switch has been sent a requestto transfer the user, who is roaming, to another WX switch. STATUS UPDATED — WX switch is receiving a final updatefrom an MAP access point about the user, who has roamedaway. WEB_AUTHING — User is being authenticated by WebAAA. WIRED AUTH’ING — User is being authenticated by the802.1X protocol on a wired authentication port. KILLING — User’s session is being cleared, because of 802.1Xauthentication failure, entry of a clear command, or some otherevent.Port/Radio Number of the port and radio through which the user is accessingthis session.MAC address MAC address of the session user.User Name Name of the authenticated user of this sessionIP Address IP address of the session user.Vlan Name Name of the VLAN associated with the session.Tag System-wide supported VLAN tag type.
