528 CHAPTER 18: S ESSION MANAGEMENT COMMANDS(Table 92 on page 529 describes the additional fields of the verboseoutput of display sessions network commands.)The following command displays information about network session 27:WX1200# display sessions network session-id 27Global Id: SESS-27-000430-835586-58dfe5aState: ACTIVEPort/Radio: 3/1MAC Address: 00:00:2d:6f:44:77User Name: EXAMPLE NatashaIP Address: 10.10.40.17Vlan Name: vlan-engTag: 1Session Timeout: 1800Authentication Method: PEAP, using server 10.10.70.20Session statistics as updated from AP:Unicast packets in: 653Unicast bytes in: 46211Unicast packets out: 450Unicast bytes out: 50478Multicast packets in: 317Multicast bytes in: 10144Number of packets with encryption errors: 0Number of bytes with encryption errors: 0Last packet data rate: 2Last packet signal strength: -67 dBmLast packet data S/N ratio: 55Table 91 describes the output of this command. For descriptions of thefields of display sessions network session-id output, see Table 93 onpage 530.Table 91 display sessions network (summary) OutputField DescriptionUser Name Up to 30 characters of the name of the authenticated userof this session.Sess ID Locally unique number that identifies this session. An asterisk(*) next to the session ID indicates fully active sessions.IP or MAC Address IP address of the session user, or the user’s MAC address ifthe user has not yet received an IP address.VLAN Name Name of the VLAN associated with the session.Port/Radio Number of the port and radio through which the user isaccessing this session.
