Technical data 161MaterialsDrive enclosure • PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1CCool Grey) and RAL 9002• PC+10%GF 3.0mm, Color RAL 9002 (in framesR0…R3 only)• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thicknessof coating 100 micrometers, color NCS 1502-YPackage Plywood, cardboard and moulded pulp. Foam cushionsPE, PP-E, bands PP.Disposal The main parts of the drive can be recycled to preservenatural resources and energy. Product parts and materialsshould be dismantled and separated.Generally all metals, such as steel, aluminum, copper andits alloys, and precious metals can be recycled asmaterial. Plastics, rubber, cardboard and other packagingmaterial can be used in energy recovery. Printed circuitboards and DC capacitors (C1-1 to C1-x) need selectivetreatment according to IEC 62635 guidelines. To aidrecycling, plastic parts are marked with an appropriateidentification code.Contact your local distributor for further information onenvironmental aspects and recycling instructions forprofessional recyclers. End of life treatment must followinternational and local regulations.Applicable standardsThe drive complies with the following standards. The compliance with the European LowVoltage Directive is verified according to standard EN 61800-5-1.EN 60204-1:2006 + AC:2010 Safety of machinery. Electrical equipment of machines.Part 1: General requirements. Provisions for compliance:The final assembler of the machine is responsible forinstalling- emergency-stop device- supply disconnecting device.IEC/EN 60529:1992 + A2: 2013 Degrees of protection provided by enclosures (IP code)EN 61000-3-12:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits -Limits for harmonic currents produced by equipmentconnected to public low-voltage systems with input currentIEC/EN 61800-3:2004 + A1:2012 Adjustable speed electrical power drive systems. Part 3:EMC requirements and specific test methodsIEC/EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1:Safety requirements – electrical, thermal and energyIEC 60664-1:2007 Insulation coordination for equipment within low-voltagesystems. Part 1: Principles, requirements and tests.UL 508C 3rd edition UL Standard for Safety, Power Conversion Equipment,second edition
