ABB RTU500 series User Manual

Contents

ABB RTU500 series User Manual Manual pdf 11 page image

RTU500 series Remote Terminal Unit ManagementConfiguration ManagementABB AG - 1KGT 150 924 V000 1 | 2-12 Management2.1 Configuration ManagementTo navigate to the Configuration-File Manager page, click on "Management" and on "ConfigurationsManagement" in the navigation frame. The different table columns show the properties of the dif-ferent files.Figure 7: Configuration files: navigation tilesThe files on the RTU will be displayed on top of this page. Below is the drop in area. Here you can dropnew configuration files to be downloaded to the RTU. Only one file is needed for the configurationof an RTU: .rcd (RTU configuration data)On the RTU there can be stored 4 different RTUtil500 configuration files:– Active: The active configuration file is at the moment executed by the RTU– Backup: It is possible to store one backup copy of a configuration file. This file can be activatedagain.– Base: A configuration file downloaded from the PC will be shown as base configuration file– Editing: A configuration file generated by the WebUI configuration is called editingIn addition the Integrated HMI project files can be downloaded with this page.The different table columns show the properties of the different configuration files.