ABB RTU500 series User Manual

Contents

ABB RTU500 series User Manual Manual pdf 52 page image

Test & Simulation RTU500 series Remote Terminal UnitSEV and SSC view - Elements of the user interface4-16 | 1KGT 150 924 V000 1 - ABB AG4.5.3 STOP buttonSee Chapter 4.4.3.4.5.4 Control panel for process connectionThis control panel is the same explained in Chapter 4.4.4.From the point of view of process disconnection, SEV are treated in the same way that processinformation inputs (SPI, DPI, STI, AMI, DMI, MFI, BSI and ITI). That is, they are disconnected inmonitoring direction.On the other hand, SSC are treated in the same manner as process command outputs (SCO, DCO,RCO, ASO, DSO, FSO and BSO). They are disconnected in controlling direction. Note that automaticsimulation of pre-defined command responses and command reactions are not allowed here.4.5.5 Status indicatorSee Chapter 4.4.5.4.5.6 Log file download linkSee Chapter 4.4.6.4.6 Security Events view - elements of the user interface4.6.1 Signals gridThe signal grid, like in the other two views, is central element of the user interface in the Securityevents view. For this reason, please read Chapter 4.4.1 carefully.In this view's grid, the three first column help the user to filter the appropriate signals, while the twolast ones trigger the simulation. As the security events have no value or cause of transmission, thisgrid has not such columns.4.6.2 Input for multiple simulation intervalSee chapter Chapter 4.4.2.4.6.3 STOP buttonSee chapter Chapter 4.4.3.