249 Copyright © Acronis, Inc., 2000-2010 If the archive is stored on an FTP or SFTP server, type the server name or address in the Pathfield as follows:ftp://ftp_server:port _number or sftp://sftp_server:port numberIf the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.After entering access credentials, the folders on the server become available. Click theappropriate folder on the server.You can access the server as an anonymous user if the server enables such access. To do so,click Use anonymous access instead of entering credentials.According to the original FTP specification, credentials required for access to FTP servers are transferredthrough a network as plaintext. This means that the user name and password can be intercepted by aneavesdropper using a packet sniffer. If the archive is stored on a locally attached tape device, expand the Tape drives group, thenclick the required device.When operating on a machine booted with bootable media: To access a managed vault, type the following string in the Path field:bsp://node_address/vault_name/ To access an unmanaged centralized vault, type the full path to the vault's folder.2. In the table to the right of the tree, select the archive. The table displays the names of thearchives contained in each vault/folder you select.While you are reviewing the location content, archives can be added, deleted or modified byanother user or by the program itself according to scheduled operations. Use the Refresh buttonto refresh the list of archives.3. Click OK.6.5.2 Backup selectionTo select a backup:1. Select one of the backups by its creation date/time.2. To assist you with choosing the right backup, the bottom table displays the volumes contained inthe selected backup.To obtain information on a volume, right-click it and then click Information.3. Click OK.6.5.3 Access credentialsTo specify credentials1. Select one of the following: Use the current user credentialsThe program will access the location using the credentials of the current user. Use the following credentialsThe program will access the location using the credentials you specify. Use this option if thecurrent user account does not have access permissions to the location. You might need toprovide special credentials for a network share or a storage node vault.Specify:
