264 Copyright © Acronis, Inc., 2000-2010 Universal Restore can be enabled if Acronis Backup & Recovery 10 Universal Restore isinstalled on the machine where the media is created.3. [optional] The timeout interval for the boot menu plus the component that will automaticallystart on timeout. If not configured, the Acronis loader waits for someone to select whether to boot theoperating system (if present) or the Acronis component. If you set, say, 10 sec. for the bootable agent, the agent will launch 10 seconds after themenu is displayed. This enables unattended onsite operation when booting from a PXEserver or WDS/RIS.4. [optional] Remote logon settings: user name and password to be entered on the console side at connection to the agent. If youleave these fields empty, the connection will be enabled on typing any symbols in theprompt window.5. [optional] Network settings (p. 266): TCP/IP settings to be assigned to the machine network adapters.6. [optional] Network port (p. 267): the TCP port that the bootable agent listens for incoming connection.7. The type of media to create. You can: create CD, DVD or other bootable media such as removable USB flash drives if the hardwareBIOS allows for boot from such media build an ISO image of a bootable disc to burn it later on a blank disc upload the selected components to Acronis PXE Server upload the selected components to a WDS/RIS.8. [optional] Windows system drivers to be used by Acronis Universal Restore (p. 267). This windowappears only if the Acronis Universal Restore add-on is installed and a media other than PXE orWDS/RIS is selected.9. Path to the media ISO file or the name or IP and credentials for PXE or WDS/RIS.Kernel parametersThis window lets you specify one or more parameters of the Linux kernel. They will be automaticallyapplied when the bootable media starts.These parameters are typically used when experiencing problems while working with the bootablemedia. Normally, you can leave this field empty.You also can specify any of these parameters by pressing F11 while in the boot menu.ParametersWhen specifying multiple parameters, separate them with spaces.acpi=offDisables Advanced Configuration and Power Interface (ACPI). You may want to use thisparameter when experiencing problems with a particular hardware configuration.noapic
