95 Copyright © Acronis, Inc., 2000-2010Note: Acronis Backup & Recovery 10 Online supports only HTTP and HTTPS proxy servers.Proxy settings for the agent and the management server are configured separately, even if both areinstalled on the same machine.To set up proxy server settings1. Select the Use a proxy server check box.2. In Address, specify the network name or IP address of the proxy server—for example:proxy.example.com or 192.168.0.13. In Port, specify the port number of the proxy server—for example: 804. If the proxy server requires authentication, specify the credentials in User name and Password.5. To test the proxy server settings, click Test connection.3.3 Machine optionsThe machine options define the general behavior of all Acronis Backup & Recovery 10 agentsoperating on the managed machine, and so the options are considered machine-specific.To access the machine options, connect the console to the managed machine and then selectOptions > Machine options from the top menu.3.3.1 Machine managementThis option defines whether the machine has to be managed centrally by the Acronis Backup &Recovery 10 Management Server.To be able to use this option, you must be logged on as a member of the Administrators group onthe machine.You have the opportunity to register the machine on the management server when installing anAcronis Backup & Recovery 10 agent. If the machine is not registered, selecting Centralizedmanagement here will initiate the registration (p. 408). Or you can add the machine to themanagement server on the server side. Any of the three registration methods require the serveradministrator privileges.Selecting Stand-alone management on a registered machine will result in the machine stoppingcommunication with the server. On the management server, the machine appears as Withdrawn.The management server administrator can delete the machine from the server or register themachine once again.The preset is: Stand-alone management.To set up centralized management on the machine:1. Select Centralized management.2. Specify the Management Server IP/Name.3. Specify the user name and password of the management server administrator on prompt.4. In the Machine's registration address, select how the machine will be registered on themanagement server: by its name (recommended) or by its IP address.5. Click OK and the machine will be registered on the management server.To disable centralized management, select Stand-alone management.
