70 Copyright © Acronis, Inc., 2000-2010The policy gets the Warning status on Windows machines that have either a D: or F: volume, unlessan event that will result in an error occurs.The policy that has to back up the [System] and the /dev/sda1 volumes, will get the Warning statuson the Windows machines (since /dev/sda is not found) and on the Linux machines that have the/dev/sda1 volume (since the [System] volume is not found). The policy will get the Error status onLinux machines that do not have a SCSI device.The following table provides details.State Status DescriptionDeploying Error The deployment log has errors, for example, disk space runs outWarning The deployment log has warnings: the machine went offline during thedeployment; cannot connect for N days…OK The deployment log does not have errors and warningsDeployed Error The status of the corresponding backup plan is ErrorWarning The status of the corresponding backup plan is WarningOK The status of the corresponding backup plan is OKUpdating Error The updating log has errors: cannot delete the locked task, the Acronisservice is stopped…Warning The updating log has warningsOK The updating log does not have errors and warningsRevoking Error The revoking log has errorsWarning The revoking log has warningsOK The revoking log does not have errors and warningsIn addition to the deployment state and status as related to a specific machine, the backup policy hasthe deployment state and status on a group of machines and the cumulative deployment state andstatus of the policy.2.14.5.3 Policy deployment state on a groupTo see this parameter, select Machines in the tree, then select the group, and then select the Backuppolicies tab on the Information pane.This state is defined as a combination of deployment states of the policy on the machines included inthe group and its child groups.For example, you applied the policy to the group consisting of machines A and B. While thedeployment takes place on both machines, the policy's state on the group will be "Deploying". If thedeployment completes on one of the machines while it continues on the other, the state will be"Deploying, Deployed". When the deployment completes on both machines, the state will be"Deployed".2.14.5.4 Policy status on a groupTo see this parameter, select Machines in the tree, then select the group, and then select the Backuppolicies tab on the Information pane.
