Chapter 7. Creating a Dial Plan61200226L1-1 ATLAS 800 PLUS User Manual 7-5For User Termination, there is one PRI, one RBS T1, and three BRIs(see Table 7-2 on page 7-5).Implement the Dial Plan1. Using the terminal menus, navigate to the Dial Plan menu.2. Select the Global Parameter submenu. Select the Area Code option and enterthe area code. Press Enter when you’re done.3. Navigate to the Dial Plan submenu and select Network Term (Terminations).4. For PRI A, select Slot 0/Port 1. Select PRI under Sig to define to ATLAS theinterface type to be PRI.Table 7-2. User TerminationNAME PORT INCOMINGACCEPT #OUTGOINGREJECT #OTHERBRI D,E,F Octal BRISlot 1, Port 4-5,6888-1001 (D);888-1002 (E);888-1003 (F)Blank - No callednumber will berejected.BRI type:5ESS SPID # to match VideoEquipment provisioning.Phone numbers:888-1001 (D);888-1002 (E);888-1003 (F)Phone numbers must matchphone numbers provisioned invideo equipment.PRI-B Controller T1Slot 0, Port 2888-1010Forms a huntgroup.Blank - No callednumber will berejected.PRI type:5ESSMust match RAS equipment.DID=noneT1-A Slot 2, Port 1 821-8XXXAccepts allcallsbeginning with821-8.1-900-$Rejects all callsbeginning with1-900.RBS 1st DS0=1; #DS0 = 24Signalling = E&M winkDID = Enable/# of digits = 4
