Chapter 4. Front Panel Operation and Menu Structure4-4 ATLAS_800PLUS User Manual 61200226L1-1Status MenuThe Status menu branch lets you view the status of the ATLAS_800PLUS BaseUnit and any installed modules.S0 SystemThe S0) System option displays status options that are available for theATLAS_800PLUS Base Unit. Choose from Ethernet (see “Ethernet Status” on page4-4) or Chain Port (see “Chain Port Status” on page 4-4).Ethernet StatusThis read-only option shows the status of the 10BaseT Ethernet connectionport. The following port status options display in the LCD window. An aster-isk (*) indicates activity for the item.Chain Port StatusThis read-only option indicates the status of the Chain Port. The followingport status options display in the LCD window. An asterisk (*) indicates activ-ity for the item.S1 through S8 (modules)Select options S1 through S8 to display the current status of installed modules. S1corresponds to slot 1, S2 to slot 2, and so on. When you select one of these options,an expanded description of the card status displays. The status types include ON(Online), OFF (Offline), NRSP (No Response), NRDY (Not Ready), and RST(Restarting).Port status ... Means that...TX Data is being transmitted from the 10BaseTport on the system controller.RX Data is being received on the 10BaseT port.LNK Indicates the current status of the 10BaseT linkintegrity test (should always be on when theunit is connected to a functional 10BaseT hub).Port status... Means that...RTS Request to send.CTS Clear To send.DTR Data terminal ready.DCD Data carrier detect.
