Chapter 2. Installation2-6 ATLAS_800PLUS User Manual 61200226L1-1Ethernet 10BaseT ConnectionThe 10BaseT port (RJ-48C) provides an Ethernet LAN connection, which is usedfor TFTP, SNMP, and Telnet connection. See Table 2-4 on page 2-6 for the pinout.ConnectionThe network connection is as follows:MON (Monitor)The MON test jack provides a bridged access jack for non-intrusive monitoring ofthe T1 circuits receiving data. When connected to this jack, the test equipmentshould be configured for a bridged termination.Table 2-3. Network PinoutPIN NAME DESCRIPTION1 R1 RXDATA-RING Receive data from the network2 T1 RXDATA-TIP Receive data from the network3 UNUSED —4 R TXDATA-RING Send data toward the network5 T TXDATA-TIP Send data toward the network6,7,8 UNUSED —Connector type (USOC) RJ-48CPart number AMP# 555164-2Table 2-4. Ethernet 10BaseT PinoutPIN NAME DESCRIPTION1 TX1 Transmit Positive2 TX2 Transmit Negative3 RX1 Receive Positive4 & 5 UNUSED —6 RX2 Receive Negative7 & 8 UNUSED —
