ADTRAN ATLAS 800PLUS User Manual

Contents

ADTRAN ATLAS 800PLUS User Manual Manual pdf 121 page image

Chapter 8. Updating Firmware61200226L1-1 ATLAS_800PLUS User Manual 8-5Figure 8-2. Update Firmware Menu InterfaceOnly Modules which are upgradable display as choices for the Module Type fieldwhen updating all modules of a type in the ATLAS.9. Select TFTP for the Transfer Method. The ATLAS menu now displays twoadditional fields which must be entered for TFTP transfers.10. In the field TFTP Server IP Address, enter the IP address of the network serverthat was recorded in Step 2. ATLAS uses this field to locate the network serveron which the update file resides.11. In the field TFTP Server Filename, enter the full path name and file name of theupdate file that was recorded in Step 2.12. In the Restart Schedule field, select the desired time at which the module willperform a restart after completing the update process. For the systemcontroller, you can select either Restart Immediately After Update or Restart atSpecified Date and Time. The Restart Immediately After Update option informsATLAS to automatically restart the module immediately after the updateprocess has completed. The Restart at Specified Date and Time option allowsyou to select a date and time at which the ATLAS will automatically restartthe module after the update process has completed. For modules whichreside in expansion slots, the Restart at Specified Date and Time option is notavailable since they are unable to maintain normal operation during theupdate process.13. If the Restart at Specified Date and Time option is selected in the RestartSchedule field, the Restart Date and Time field is provided to allow entering adate and time at which the restart of the module will occur.14. The Current Update Status field displayed next is a read-only field indicatingthe progress of the current firmware update or any errors encountered duringthe download process. This field displays Idle if no firmware update iscurrently in progress. At the end of an update, the contents of the CurrentUpdate Status field are copied into the Previous Update Status field, which isdisplayed next. If All Modules of a Type is selected for the Module Slot field, theCurrent Update Status field becomes a menu selection which allows thefirmware update status of all the modules to display.