ADTRAN ATLAS 800PLUS User Manual

Contents

ADTRAN ATLAS 800PLUS User Manual Manual pdf 134 page image

Chapter 10. ADTRAN Utilities10-6 ATLAS_800PLUS User Manual 61200226L1-1Clear LogDeletes the information stored in the Log field.Status FieldThis field displays general information about port and transfer status. This field isread-only. The unlabeled field in the center of the screen displays prompts aboutthe status of active transfers, such as bytes transferred and received.Log FieldThis field displays a record of all of the events that occur during the time the TFTPserver is enabled. Use the scroll bar to move up and down the list. To clear theinformation in this field, from the Print Log menu, select Clear Log. Save thisinformation to a file before deleting it with the To Clipboard command.Saving the Current Configuration to a TFTP Server1. Make sure the TFTP server is running on a remote machine. If you are usingthe ADTRAN TFTP Server program, just start the program and the server isautomatically enabled.2. Log in using Telnet to the ATLAS 800 for which you want to save theconfiguration file.A Level 3 or better password is required for performing a configuration download,the same level required to modify most configuration parameters. Please consultthe ATLAS administrator if level 3 access is not available.3. Select the System Utility menu, then the Config Transfer menu.4. Set TFTP Server IP Address to the IP address of the machine running theTFTP server program.If you are using the ADTRAN TFTP server, the IP address displays in the Statusfield.5. Change TFTP Server Filename to a unique filename. This will be the name ofthe configuration file to save to the remote server.You must enter the entire directory path to the file name.Some TFTP servers constrain the format of the filename depending on the op-erating system of the server. For example, a TFTP server running on a PC un-der Windows 3.1 may only permit 8.3 format filenames (8 characters, period,and three extension characters).6. Move to the Save Config Remotely activator button and press Enter toproceed with the transfer. Respond with Y to the confirmation request.7. The Current Transfer Status field indicates the progress of the transfer.8. Once complete, the Previous Transfer Status field indicates success orfailure of the transfer. If successful, it will indicate TFTP Download