Chapter 8. Packet Manager61200305L1-1 ATLAS 550 User Manual 8-11U SAGE Read Security: 5This field displays a 7-character summary of the references to this link.Each character can be a dash (-), or it can be a character indicating theresource represented by the character position (see Table 8-2 on page 8-11).TEST Provides menus for controlling test options for packet endpoints.E NDPNT N AME Read Security: 5Displays the name of the packet endpoint.P ROTOCOL Read Security: 5Displays the protocol running on this packet endpoint.S UBLINK Write Security: 3; Read Security: 5Displays test menus for the packet endpoint sublinks. The menus varydepending on the protocol. Testing is not supported on TBOP.N AMEUser-defined name for the DLCI.DLCILocal address for each PVC as assigned by the carrier.T ESTShows the test mode for this PVC.Table 8-2. Usage CharactersCharacter Description1 Packet connection in the first dedicated connections map.2 Packet connection in the second dedicated connections map.3 Packet connection in the third dedicated connections map.4 Packet connection in the fourth dedicated connections map.5 Packet connection in the fifth dedicated connections map.s Switched packet connection in the dial plan.u Used by one or more packet switch connections or packet voiceentries.Packet voice entries are in either theD EDICATED M APS or theD IAL PLAN.
