Chapter 8. Packet Manager8-14 ATLAS 550 User Manual 61200305L1-1CONFIG Write Security: 3; Read Security: 5Determines data source and destination. The available options depend onthe protocol selected.C ONFLICT Indicates DLCI mismatch.F ROM Indicates data source.TO Indicates data destination.C NCTS S ORT Determines the order in which connections are displayed within PACKETC NCTS. Options include F ROM P KT ENDPT /SUBLINK, TO PKT E NDPT /S UBLINK,C ONNECTION P ROTOCOL, and O FF.F RAME R ELAY IQ Use this menu to gather and store statistical information in the submenusE NABLE IQ S TATS, PORT ENABLES, C ONFIG, and VIEW IQ S TATISTICS.F RAME R ELAY IQ provides information about frame relay activity. Statisticalinformation for ports and PVCs is collected in day and interval (5, 10, 15, 20,or 30 minutes) statistics tables. Users can adjust the number of days andnumber of intervals for which statistics are gathered; however, interval col-lections are limited to 5, 10, 15, 20, or 30 minutes.E NABLE IQ S TATS Write security: 2; Read security: 5Globally enables and disables IQ statistics gathering. IQ statistics are onlygathered when this option is enabled. This field defaults to the original set-ting of [15 MIN , 7 DAYS , 96 INTS] when re-enabled.P ORT E NABLES Enables and disables IQ statistics gathering for each port. Use the submenusN AME, ENABLE, A LL S UBLINKS, and S UBLINKS to configure the individualports.N AME Read security: 5Displays the port number and name.ENABLE PORT Write security: 2; Read security: 5Enables and disables IQ statistics gathering for the port identified in N AME.A LL S UBLINKS Write security: 2; Read security: 5Provides an easy way to enable or disable IQ statistics gathering on all sub-links. When this activator reads D ISABLE, pressing Enter disables IQ statis-
